Re: GM300 problem


Joe Murrin
 

I have a pair of GM300's setup as a GMRS repeater but don't currently have a system setup to read the code-plug. If you are local, I would be more than happy to share the codeplug in exchange for assistance in getting a system setup myself to read/write to the GM300's

On Wed, Mar 3, 2021 at 11:47 PM Todor <z31rm@...> wrote:

Good idea!

Thanks a lot!

Todor

 

From: main@Radios.groups.io [mailto:main@Radios.groups.io] On Behalf Of Sudvia Traders & Co. Ltda.-
Sent: Wednesday, March 3, 2021 23:19
To: main@radios.groups.io
Subject: Re: [Radios] GM300 problem

 

Hi Todor,

Well, I had experienced  same problem while ago. What I did, to clone with other GM300 and problem was solve. 

After that, you can write again with the right codeplug.

73’

 

El El mié, 3 de mar. de 2021 a la(s) 18:02, Todor <z31rm@...> escribió:

Hi Andy!

 

TKS for reply.

I am not sure if I could use codeplug for UHF model.

Mine is VHF .

Tjanks anyway!

73,

Todor Z31RM

 

From: main@Radios.groups.io [mailto:main@Radios.groups.io] On Behalf Of Andy KB1UIF
Sent: Wednesday, March 3, 2021 21:22
To: main@Radios.groups.io
Subject: Re: [Radios] GM300 problem

 

Hi, I used to have a code plug for an I think it was 8 ch UHF GM300 handy.

It's been a long time since I used it or the radio as the programming was dos based.

If I can find it do you think it would be of any use to you?

 


From: main@Radios.groups.io <main@Radios.groups.io> on behalf of Todor <z31rm@...>
Sent: Monday, January 18, 2021 6:33 AM
To: main@Radios.groups.io <main@Radios.groups.io>
Subject: [Radios] GM300 problem

 

Hello all,

 

Accindentally I reprogrammed GM300 with wrong code plug.

Looks like this model was limited to less programms and I uploaded 16 programs into the radio .

Now , I can read content and there are 16 programs within but TX is inhibited .

Does anybody has good codeplug for this model:

 

FCCABZ99FT3030

TANAPA HUD3603A

Model M33GMC09CAA

s/n 159TYYF989

 

This is what I can read from it.

Codeplug witn only 4 program loc is good enough .

Thanks in advance.Regards,

 

Todor

 

 

 

Join main@Radios.groups.io to automatically receive all group messages.