1. main@Radios.groups.io
Topics

MaxTrac

Fabian Nogue
 

Hi. I am Fabian from Buenos Aires Argentina, I have a maxtrac in low range of vhf 60MHz.
It can be programmed by deleting 27c256. Anyone have an idea, because I have the soft radmbl and I can't program it.
Thank you
Will
 

Fabian,

Radmbl only programs Radius radios. 

Maxtracs require “maxtrac.exe”

I hope that helps,

Will

On Mar 18, 2020, at 7:53 AM, Fabian Nogue <fabian_12345@...> wrote:

Hi. I am Fabian from Buenos Aires Argentina, I have a maxtrac in low range of vhf 60MHz.
It can be programmed by deleting 27c256. Anyone have an idea, because I have the soft radmbl and I can't program it.
Thank you
Fabian Nogue
 


Thanks Will, but I couldn't, I have several programs, several versions, I program other equipment in that line without problems. But this particularly gives as it does not recognize the port. I program the GM300, the sm50, and the last ones the m208, but with this maxtrac I can't. I tried all the programs up to the maxtraclab when I read it, some time passed and it threw me that it did not recognize the port and the computer made several beep sounds. and when I check the port from the configuration for the PC with F3 with the gm300 program it gives me an error and then it tells me port OK. It is very rare.
Well, thank you very much and I appreciate your attention.
Andy Bagwell
 

Your processor could be to fast.  I have to use a  Windows 98 laptop with a 166 MHz Processor and 4 megs of ram for it to work.  Also make sure you have the Maxtrac program and not the maratrac.  you can use newer computer but make sure if you're using dosbox then go into the dosbox options and go to cycles= make it 166 I believe and then save the options


On Thu, Mar 19, 2020 at 12:52 PM Fabian Nogue <fabian_12345@...> wrote:

Thanks Will, but I couldn't, I have several programs, several versions, I program other equipment in that line without problems. But this particularly gives as it does not recognize the port. I program the GM300, the sm50, and the last ones the m208, but with this maxtrac I can't. I tried all the programs up to the maxtraclab when I read it, some time passed and it threw me that it did not recognize the port and the computer made several beep sounds. and when I check the port from the configuration for the PC with F3 with the gm300 program it gives me an error and then it tells me port OK. It is very rare.
Well, thank you very much and I appreciate your attention.



--
Remember That Jesus Loves you
He is still in control
Concetto Dovere
 



Il giorno mer 18 mar 2020 alle ore 17:56 Fabian Nogue <fabian_12345@...> ha scritto:
Hi. I am Fabian from Buenos Aires Argentina, I have a maxtrac in low range of vhf 60MHz.
It can be programmed by deleting 27c256. Anyone have an idea, because I have the soft radmbl and I can't program it.
Thank you

I'm sending you a .rar file that could be interesting for you. The google drive link is:


--
Clausola di Riservatezza
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita. Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo gentilmente ad eliminarlo dopo averne dato tempestiva comunicazione al mittente e a non utilizzare in alcun caso il suo contenuto.
Qualsivoglia utilizzo non autorizzato di questo messaggio e dei suoi eventuali allegati espone il responsabile alle relative conseguenze civili e penali.
1 - 5 of 5